McLaren Applied

Powertrain & Chassis Control Module PCCU (Automotive)

The PCCU is a cost-effective auxiliary processing unit for general purpose control applications.

It provides a powerful 128MHz processing platform with 1kHz sampling of analogue input channels and actuation of high/low side drive stage pairs. A PowerPC provides the processing resource for application code which may be auto-coded from Matlab/Simulink using our GDE.

The PCCU includes three CAN interfaces and it can handle multiple analogue and digital inputs, control external sub-systems driving H-bridges, solenoid valves etc.

The PCCU can be used as a stand-alone control unit with a direct CAN connection for programming and configuration or it could make an ideal companion to one of our other ECUs.

In Detail

Connector

• 154-way connector Siemens A2C53095645
- 58 pin cavity with 6 pins rated at 15A, rest 3A
- 96 pin cavity populated with 3A capable pins

• 2x high speed CAN with wake-up enabled/disabled by HW links

• 1x high speed CAN without wake-up, with controlled slew rate

Key Features

• Cost-effective auxiliary or main ECU

• Matlab/Simulink auto-coding interface

• 3 CAN interfaces with wake-up

Inputs

• 2x KL87 fused supplies (20A continuous, 30A peak)

• 1x KL31

• 1x KL30 supply for shutdown, housekeeping, CAN bus standby

• 1x KL15 signal to trigger start-up and shutdown

• 22x sensor inputs (currently used for gear shift management, shift request)

• 13x analogue inputs

• 3x digital inputs

Outputs

• 3x sensor supplies

• 2x low side drives

• 2x two-wire H-bridge outputs

• 28x two-wire solenoid controls

• 1x constant current heater drive for electrothermic oil level sensor

Mechanical

• Dimensions 173x172x40mm

• Mass 850g

• Mounting position in engine bay

• Operating/storage temperature range -40/+105°C (class II)

Electronical details

• Operational voltage 8-16V

• Main MCU NXP MPC5554MVR132 (456 BGA balls)

• Monitoring processor MC9S12XEP100MAL

Compliance

• Protection IP6K6K

• Safety integrity level ASIL-D

Images/Diagrams

PCCU

Powertrain & Chassis Control Module

PCCU

Contact us about Powertrain & Chassis Control Module

The McLaren Applied catalogue includes electronics, sensors, electrical components and software, but the range of standard products is only part of the story. We can produce bespoke solutions to fulfil the most specialised of functions. To find out more about how we can meet your needs and exceed your expectations, please fill out the form below and a member of our team will be in contact.

Privacy Policy - Required.
There was a problem submitting your details, please try again.
Loading

Thank you for your interest in McLaren Applied. Your details have been sent successfully and a member of the team will get in touch with you shortly.

The PCCU is a cost-effective auxiliary processing unit for general purpose control applications.

It provides a powerful 128MHz processing platform with 1kHz sampling of analogue input channels and actuation of high/low side drive stage pairs. A PowerPC provides the processing resource for application code which may be auto-coded from Matlab/Simulink using our GDE.

The PCCU includes three CAN interfaces and it can handle multiple analogue and digital inputs, control external sub-systems driving H-bridges, solenoid valves etc.

The PCCU can be used as a stand-alone control unit with a direct CAN connection for programming and configuration or it could make an ideal companion to one of our other ECUs.

McLaren Applied
Manufactured by: McLaren Applied
Model: Powertrain & Chassis Control Module
Product ID: PCCU (Automotive)

You've selected 1 product, please select at least 1 more to start comparing.

You've selected {$ vm.basketTotal $} products, you can compare up to {$ vm.basketMax $} products.

You've selected the maximum of {$ vm.basketMax $} products.

Compare Compare