Microwave Receiver LRX-310B

LRX-310B is a small, lightweight, microwave receiver module with integral antenna. It outputs trigger pulses as it passes through the beam of an LTX-310 Lap Trigger transmitter. The interval between pulses is determined by the transmitter settings and thus by making an appropriate choice of settings and transmitter locations around the circuit, it is possible to identify which particular transmitter the receiver is passing.

The LRX-310B itself cannot distinguish between different transmitter settings. This task must be performed by software in the ECU to which LRX-310B is connected.

In Detail

Application

  • Lap timing when used with compatible ECU and track-side transmitter.

Electrical

Characteristics assume use with an LTX-310 or similar Lap Trigger Transmitter.

  • Supply Voltage 5.0±0.25V DC
  • Operating frequency 10.6±0.5GHz
    • ±13° horizontal
    • 40° above horizon, 27° below horizon
  • Range approximately 25m (when properly aligned)
  • Range approximately 82' (when properly aligned)
  • Supply current 130mA max with 5.0V supply
    • Impedance
    • Max voltage outside LTX beam 150mV
    • Max voltage inside LTX beam 4.75 to 5.25V (depending on unit supply voltage)
  • Output voltage increases with signal strength as antenna passes through LTX beam
  • Output voltage pulses low to
  • Valid pulse intervals are in the range 456-1576us (36 unique intervals in 32us steps)
  • Response time

Electro Magnetic Compatibility

  • Complies with the essential protection requirements of 2004/108/EEC

Connector Definition

  • EHS 0F 303 XLC case-mounted Lemo socket with male pins
  • Pin 1 Supply
    Pin 2 Ground
    Pin 3 Output

Mechanical

  • Case material: aluminium alloy, hard black anodised
  • Antenna covered by 75um thick PTFE/fibreglass tape
  • Weight approx 80g
  • Mounted using two M3 tapped holes on rear of case

Environmental

  • Splash resistant to standard motorsport fluids
  • Operating temperature 0°C to +60°C
  • Storage temperature -25 to +85°C
  • Bump tested to ±50g ½ sine 11ms five times per axis
  • Random vibration with spectrum below, three axes, 24hrs
  • 100Hz 0.00797 g
    200Hz 0.17157 g
    300Hz 0.54279 g
    650Hz 0.00965 g
    1000Hz 0.02080 g

Images/Diagrams

Ordercodes

Description Ordercode
LRX-310 O 030 040 003 000

Contact us about Microwave Receiver

The McLaren Applied Technologies catalogue includes electronics, sensors, electrical components and software, but the range of standard products is only part of the story. We can produce bespoke solutions to fulfil the most specialised of functions. To find out more about how we can meet your needs and exceed your expectations, please fill out the form below and a member of our team will be in contact.

I have read the McLaren Applied Technologies Privacy Policy - Required.
There was a problem submitting your details, please try again.
Loading

Thank you for your interest in McLaren Applied Technologies. Your details have been sent successfully and a member of the team will get in touch with you shortly.

LRX-310B is a small, lightweight, microwave receiver module with integral antenna. It outputs trigger pulses as it passes through the beam of an LTX-310 Lap Trigger transmitter. The interval between pulses is determined by the transmitter settings and thus by making an appropriate choice of settings and transmitter locations around the circuit, it is possible to identify which particular transmitter the receiver is passing.

The LRX-310B itself cannot distinguish between different transmitter settings. This task must be performed by software in the ECU to which LRX-310B is connected.

McLaren Applied Technologies
Manufactured by: McLaren Applied Technologies
Model: Microwave Receiver
Product ID: LRX-310B

You've selected 1 product, please select at least 1 more to start comparing.

You've selected {$ vm.basketTotal $} products, you can compare up to {$ vm.basketMax $} products.

You've selected the maximum of {$ vm.basketMax $} products.

Compare Compare