High-Speed Data Logger HSL-500

The HSL-500 is a compact, self-contained data logger for applications in top-level motorsport. It includes many innovative features including advanced hardware acceleration of front-end signal processing functions including filtering and down-sampling.

The unit can acquire data from on-board interfaces at rates of up to 400 kilosamples per second, and from remote units via communications links. A high-performance on-board PowerPC microprocessor offering over 1000MIPS processing power hosts customer applications for real-time data analysis. Application code may be autocoded using our Graphical Development Environment (GDE) from Matlab/Simulink control modules. Data is logged to 2GB of on-board Flash memory and downloaded for analysis via a Gigabit Ethernet network connection.

For example system configurations please refer to our Units and Datalogging application notes.

Key Features

  • 400KHz analogue sampling speed

In Detail

Application

  • General purpose data logging
  • Real time telemetry transmission via ARCNET connection to MES telemetry system

Electrical

  • Supply voltage 8V to 16V DC with reverse polarity and transient over-voltage protection
  • 2GB Flash memory for logging
  • Hardware acceleration of front-end signal processing functions including filtering and down-sampling
  • Customer application processing power >1000MIPS

Electro Magnetic Compatibility

  • Complies with the essential protection requirements of 89/336/EEC

Other Features

  • ATLASLite and System Monitor configuration software licences supplied with each unit

Connection Definition

  • Two 64-way Deutsch AS Double Density connectors

Mechanical

  • Case material aluminium alloy, hard-anodised black
  • Weight 625g

Environmental

  • Splash resistant to standard motorsport fluids
  • Lids sealed with o-rings
  • Maximum humidity 100%
  • Minimum operating temperature 0°C
  • Maximum operating temperature 70°C
  • Storage Temperature -10°C to 85°C
  • Vibration isolation is recommended

Sensor Inputs

  • 12 analogue inputs supporting sampling rates ≤400 kilosamples per second, 0-5V
  • 36 analogue inputs supporting sampling rates ≤100 kilosamples per second, 0-5V (Eight can be hardware configured to Pt1000 inputs)
  • One Lap trigger input
  • Eight DHE speed inputs
  • Timing synchronisation input/output
  • Ignition switch input
  • “Force Boot” analogue input, 1ksps, 0-5V
  • “IP Address Select” analogue input, 1ksps, 0-5V

Outputs

  • Three sensor supplies at 5V, 100mA (one shared between both connectors)
  • Five sensor supplies at 12V, 200mA
  • One DHE sensor supply at 12V, 200mA
  • One lap trigger supply at 5V, 200mA

Communications

  • One Gigabit Ethernet link (10/100/1000Mbps)
  • One RS232 link (up to 1Mbps)
  • One ARCNET link (10Mbps)
  • Six CAN links (1Mbps) (One CAN can be replaced by 2nd FlexRay as a build option)

Images/Diagrams

O 030 095 012 000

O 030 095 012 000

Connector Diagram

Connector Details

 
 

Connector One

  • One Lap Trigger
  • Eight DHE speed
  • One 5V sensor supply
  • Ignition switch
  • “Force Boot”
  • “IP Address select”
  • One DHE sensor supply
  • One lap trigger supply
  • One Ethernet
  • One RS232
  • One FlexRay link1
  • One ARCNET
  • Six CAN1
  • One Timing synchronisation
 

Connector Two

  • 48 Analogue inputs2
  • Three 5V sensor supplies
  • Five 12V sensor supplies
 

Ordercodes

Description Ordercode
HSL-500 High Speed Logger (2GB memory, six CAN and one Flexray) O 030 095 012 000

Contact us about High-Speed Data Logger

The McLaren Applied Technologies catalogue includes electronics, sensors, electrical components and software, but the range of standard products is only part of the story. We can produce bespoke solutions to fulfil the most specialised of functions. To find out more about how we can meet your needs and exceed your expectations, please fill out the form below and a member of our team will be in contact.

I have read the McLaren Applied Technologies Privacy Policy - Required.
There was a problem submitting your details, please try again.
Loading

Thank you for your interest in McLaren Applied Technologies. Your details have been sent successfully and a member of the team will get in touch with you shortly.

The HSL-500 is a compact, self-contained data logger for applications in top-level motorsport. It includes many innovative features including advanced hardware acceleration of front-end signal processing functions including filtering and down-sampling.

The unit can acquire data from on-board interfaces at rates of up to 400 kilosamples per second, and from remote units via communications links. A high-performance on-board PowerPC microprocessor offering over 1000MIPS processing power hosts customer applications for real-time data analysis. Application code may be autocoded using our Graphical Development Environment (GDE) from Matlab/Simulink control modules. Data is logged to 2GB of on-board Flash memory and downloaded for analysis via a Gigabit Ethernet network connection.

For example system configurations please refer to our Units and Datalogging application notes.

McLaren Applied Technologies
Manufactured by: McLaren Applied Technologies
Model: High-Speed Data Logger
Product ID: HSL-500

You've selected 1 product, please select at least 1 more to start comparing.

You've selected {$ vm.basketTotal $} products, you can compare up to {$ vm.basketMax $} products.

You've selected the maximum of {$ vm.basketMax $} products.

Compare Compare