Display Module PCU-8D

The PCU-8D is a lightweight driver display module designed for general motorsport applications. It is designed to connect to a host ECU via CAN and present the driver with information on a 4.3” display and LED lamps. The display is suitable for use in direct sunlight and at night. The text and graphics layout of the screen is user-configurable via PC software. 100 pages are available, and are selectable by CAN message.

In Detail

Application

  • Data display and warning lamps
  • Typically installed within the steering wheel, although can also be remotely mounted

Display

  • 4.3” backlit LCD display
  • Viewable area 95mm x 54mm, 480 x 272 pixel resolution
  • Viewable in direct sunlight. Brightness adjustable via CAN message for low-light conditions
  • 16 Gauge types for displaying data, including bar tacho, rev lights and variable text
  • 100 user-configurable page, selectable by CAN message
  • The display is fully customisable; page layout can be configured by PC with text and gauges
  • Alarm pages or user-configurable text warnings can be triggered by CAN messages

Communications

  • One CAN interface (1Mbps). No internal termination
  • One USB interface for configuration only

Unit Inputs

  • One reset input (active low with internal pull-up; can be left unconnected if not required)
  • One CAN address selection analogue input (connect an external resistor to unit supply ground)

Other Features

  • Configuration software tool supplied with the unit

Electrical

  • Supply voltage 8V to 16V DC
  • Supply current:

Electro Magnetic Compatibility

  • Complies with the essential protection requirements of 2004/108/EEC

Environmental

  • Size: 130mm x 81mm x 22mm
  • Weight: <230g
  • Splash resistant to standard motorsport fluids
  • Lid has a rubber seal, case fixings are sealed with silicone sealant
  • Maximum humidity: 95% non-condensing
  • Operating temperature: 0°C to +50°C
  • Storage temperature: -25°C to +85°C
  • Vibration: 100Hz to 1000Hz, all axes, 24 hours
  • Vibration isolation is recommended

Connection Definition

  • Un-terminated flying lead only (no connector fitted), length 1000mm
  • 28 AWG wire for all wires unless stated
  • USB wires are contained within a cable screen, with the other wires coiled round the USB screened cables
  • Note the unit supply is required when configuring. The unit cannot be powered by USB
  • Wire colours:
  • Orange Unit Supply Positive
    Brown Unit Supply Ground
    White CAN +
    Blue CAN -
    Green USB+
    White USB -
    Red (28 AWG) USB 5V
    Black (28 AWG) USB Ground
    - USB Screen (internally connected to supply ground)
    Grey CAN address selection input
    Yellow Reset input

Example Screen Layouts

  • The configuration software allows each page layout to be fully customised

 

Images/Diagrams

O 030 020 011 002

O 030 020 011 002

Ordercodes

Description Ordercode
Panel Display Unit PCU-8D O 030 020 011 002

Contact us about Display Module

The McLaren Applied Technologies catalogue includes electronics, sensors, electrical components and software, but the range of standard products is only part of the story. We can produce bespoke solutions to fulfil the most specialised of functions. To find out more about how we can meet your needs and exceed your expectations, please fill out the form below and a member of our team will be in contact.

I have read the McLaren Applied Technologies Privacy Policy - Required.
There was a problem submitting your details, please try again.
Loading

Thank you for your interest in McLaren Applied Technologies. Your details have been sent successfully and a member of the team will get in touch with you shortly.

The PCU-8D is a lightweight driver display module designed for general motorsport applications. It is designed to connect to a host ECU via CAN and present the driver with information on a 4.3” display and LED lamps. The display is suitable for use in direct sunlight and at night. The text and graphics layout of the screen is user-configurable via PC software. 100 pages are available, and are selectable by CAN message.

McLaren Applied Technologies
Manufactured by: McLaren Applied Technologies
Model: Display Module
Product ID: PCU-8D

You've selected 1 product, please select at least 1 more to start comparing.

You've selected {$ vm.basketTotal $} products, you can compare up to {$ vm.basketMax $} products.

You've selected the maximum of {$ vm.basketMax $} products.

Compare Compare